ME THESIS SUPERVISION

1. Model Analysis of Turbine blade with varying twist angle using Finite Element Analysis
   N.ChandraSekhar, 01-03-1653, 2004

2. Design and Analysis of Supercritical airfoil using CFD
   Narsimha Chary K, 01-03-1657, 2004

3. Thermal Analysis of Shell and Tube condenser
   ReddyvariRajasekar Reddy, 01-04-1653, 2005

4. Numerical Computation of Turbulent flow and Heat Transfer in a stationary Square  
   Ribbed channel, AravinduChaduvula, 01-04-1658, 2005

5. Numerical Analysis of Flame Spread through a free stratified air/fuel mixture
   Ch.Shravan Kumar, 01-04-1654, 2006

6. Structural Analysis and Material study of axial compressor blade for Turbo-Jet engine
   Kolipelly Praveen Kumar, 01-04-1659, 2006

7. Dynamic Analysis of Critical Rotating mounting devices for Aerospace application
   R.Subhash, 01-04-1660, 2006

8. Thermodynamic Analysis of Combined Gas and Steam cycle
   Krishna Vatte, 01-05-1665, 2006

9. Optimization of Heat pipe design
   V.Lokeswara Rao, 01-05-1666, 2006

10. CFD simulation of Gas Turbine blade cooling
    Neelakanta Reddy D, 01-05-1673, 2006

11. Flexural vibrations of heated turbine blades including the effects of root flexibility
    SK.MD.Rafiq Ahmed, 01-06-1671, 2007

12. Compressible flow analysis and performance of the bell and conical nozzle
    D.Venkata Siva Kumar, 01-06-1678, 2007

13. Static and Dynamic analysis of Truck mounted blower frame
    G.Priyatham, 01-06-1710, 2007

14. Cooling of Biomass Gas in Cooler of advanced downdraft Gasifier plant
    K.Dasharadham, 01-07-1663, 2008

15. Flow analysis of advanced biomass Gasifier
    G.Ganesh, 01-07-1664, 2008

16. Thermodynamic Equilibrium modeling & Simulation of Advanced Biomass Gasifier
    B.Harikrishna, 01-07-1665, 2008

17. Design and analysis of burner for tar removal in the biomass downdraft Gasifier
    B.Parsharamulu, 01-07-1670, 2008

18. Combustion and Heat Transfer Studies of Agro fuel in Bubbling Fluidized by Reactor.
    P.Ramchandram, 01-08-1656, 2009

19. Performance Assessment of Co-generation.
    V.SumanRaju, 01-08-1660, 2009

20. Development of Design Method for High Temperature and High Pressure Cyclone for  Bio-Mass Gasification Plant,
    R.Sunil Kumar, 01-08-1667, 2009

21. Performance Assessment of Various Coals for a pressurized fluidized bed gasifier.
    M.Rakesh Kumar, 01-08-1669, 2009.

22. Accurate Methodology for Design of orifice meter for mixture of gases.
    Mohd. Abdul Raheem, 01-09-1646, 2010.

23. Design and Analysis of Fixed Bed downdraft Biomass Gasifier Using Computational  Fluid Dynamics,
    R.Ravi Kumar, 01-09-1649, 2010.

24. Two stage Centrifugal Compressor design and analysis
    K.Roopa Devi, 01-09-1650, 2010.

25. Design analysis evacuated tube solar water heater using CFX
    AhmeedJameelGtheab, 1005-09-745301, 2011

26. Structural and Thermal analysis of an aero gas turbine rotor blade using ANSYS
    Usama J AbdulkadhmJaber, 1005-09-745328, 2011

27. Computational Analysis of an Advanced Biomass DowndraftGasifier
    RatnakarChopadaneedi, 1005-10-745302, 2012.

28. Design and Modeling of generator and evaporator for solar Icemaker
    Ameer RazzaqNoor, 1005-10-745323, 2012

29. Design and Modeling of Horizontal axis wind turbine rotor
    BalasemAbdulameerJabbar, 1005-10-745325, 2012

30. Design and Modeling of dish collector for solar energy
    Bassam A Mohammed Hussein, 1005-10-745326, 2012

31. Design and Analysis of Ducted fan for subsonic wind Tunnel
    P.ShanthiBhushan, 1005-11-745312, 2013

32. Performance Analysis of Parabolic Trough Collector for Steam Generation
    SalihMeriAbdulridha, 1005-11-745317, 2013

33. Improving Heat Transfer Rate of a Flat Plate Solar Collector
    KumailAbdulkareemHadi, 1005-11-745319, 2013

34. CFD analysis of flow and heat transfer in a pre-swirl system
    ShravankumarNagapuri, 1005-10-745319, 2013

35. Modeling and Analysis of Propeller blade for its strength
    V.Ganesh, 1005-09-745305, 2013

36. Aerodynamic Design of a Multistage Axial Flow Compressor
    Md. KhaderShariff, 1005-10-750304, 2013

37. Numerical Simulations of Cross-Flow Fan
    N.S.KumarRamanujala, 1005-10-750305, 2013

38. Flow path Analysis of High Pressure Steam Turbine by using CFD
    B.Manasa, 1005-11-745302, 2014

39. Design and Modeling a two stages Savonius wind Turbine
    Ahmed  DheyaaJawad, 1005-11-745323, 2014

40. Design and Thermal Analysis of Parabolic Solar Energy Collector for Water Heating
      and Cooking, B.Kavitha, 1005-12-745303, 2014

41. CFD Analysis of a 3-Blade H-Rotor of a Vertical Axis Wind Turbine
    G.Narendra, 1005-12-745307, 2014

42. Heat Transfer Enhancement in Flat Plate Solar Collector
    A.Jhansi, 1005-12-745315, 2014

43. Performance Analysis of Flat Plate Solar Energy Collector for Water Heating with
     Modified Risers, Mohammed Saad Abbas, 1005-12-745323, 2014

44. Low Speed Horizontal Axis Wind Turbine for Power Generation
    RaadaliJawad, 1005-12-745324, 2014

45. Enhancing the flow distribution of water in solar flat plate collector using CFD
    GirishnagKantamneni, 1005-13-745320, 2015

46. Design and CFD analysis of a compressor wheel and turbine wheel of a turbocharger
    Vigneshwar N, 1005-13-745321, 2015

47. Design and Optimization of Winglet angles for Horizontal Axis Wind Turbine
    Ali SalhSawadi, 1005-13-745323, 2015

48. Heat Transfer Analysis of Flat Plate Solar Collector with Helical Fins.
    Mohammed MohsinShkair, 1005-13-745324, 2015

49. Conjugate heat transfer study of a typical HP turbine casing
    M.Neeharika, 1005-12-750306, 2015

50. Modeling and Simulation of low wind speed vertical axis wind turbine
    PasulaRukmini. 1005-14-745320, 2016

51. Enhancing the efficiency of evacuated solar collector tube by using parabolic concentrators
    Ayesha Imroze 1005-14- 745315, 2016

52. Design and analysis of an aero spike for a 2m diameter aerospace vehicle for drag and thermal load reduction,  
    Debashish Mukherjee 1005-14-750304, 2017

53. Analysis of air driven turbine optimization for aerospace applications
    E.G.K. Venkateswar Rao 1005-14-750305, 2017

54. Performance analysis of turbine and compressor wheels of a turbocharger using CFD
    InapanuriPrasanthi 1005-15-745320, 2017

55. Enhancement of heat transfer with wavy fins automobile radiator using nano fluids through CFD analysis
    Sampath Kumar Nagam

56. 1005-15-745315, 201756 Design and Heat Transfer analysis of gas turbine blade with film cooling
    Hadeel Raheem Jasim 1005-16-745321, 2018

57. Temperature analysis in different zones of the downdraft gasifier
    Gowthami Koduri. 1005-15-750305, 2018

58. Analysis of variation in nozzle throat diameter for supersonic aerospace vehicles
    Rahul Shukla 1005-15- 750308, 2018

59. Performance analysis of centrifugal blower with backward inclined blades
    Swapna Elasani         1005-16-745318, 2019

60. Design and Analysis of shell and tube heat exchanger with no baffles and with baffles
    U. Harini        1005-16-745320, 2019

61. Coefficient of performance of analysis of VCR with helical coiled condenser using CFD
    Ande Shoba   1005-16-750301, 2019

62. Computational Fluid Flow Analysis of High Speed Turbine
    Gopu Rajashekar 1005-16-745305, 2019

63. Numerical Investigation of the Centrifugal Pump with Optimum Impeller Design
    Dasari Yogeshwar 1005-18-745309, 2020

64. CFD Analysis of Micro and Small-Scale wind Turbine blade airfoils
    Md Farhan Ahmed 1005-18-745314, 2021

65. Design and Analysis of Savonius vertical axis wind turbine with twisted blades
    Pokkunuri Sravya, 1005-19-745320, 2021

66. Modelling and analysis of a steam turbine blade with NACA4412 and NACA6515
    T.Jeevan, 1005-18-745316, 2021

67. Heat Transfer Analysis on Automobile Radiator with various fins
    Nakkala Veenarani Goud, 1005-19-745311, 2021

68. Structural Analysis of vertical stabilizers in Aircraft on different NACA profiles Chintalapati Aswini Kumar, 1005-18-745306, 2021